PRODUCT NAME Blizzard603e+ (603e/160Mhz & 040/25Mhz) BRIEF DESCRIPTION A PowerPC based acceleration board for Amiga 1200, with a MC680x0 as CoCPU. It has a "Fast add on" port for BVPPC (a graphics board) and a MiniDB50 connector for Fast SCSI-2. COMPANY INFORMATION Name: Phase5 Address: In der Au 27 D-61440 Oberursel Germany Telephone: +49 6171 628455 (Support) FAX: +49 6171/628456 (Support) Web: http://www.phase5.de LIST PRICE The latest price information can be found at Phase5's homepage, you should know that there is ways to get this board cheaper. SPECIAL HARDWARE AND SOFTWARE REQUIREMENTS HARDWARE Amiga 1200 SOFTWARE Phase5's exec library or H&P's WarUp for full functionality. MACHINE USED FOR TESTING Amiga 1200T, 2 MB chip RAM, 40 MB fast RAM. Quantum Fireball 2.5 GB internal hard drive (IDE). Acer CD-743e internal CDR (IDE). AmigaDOS 3.0 INSTALLATION Installation of the hardvare is quite simple, just plug it into the Amiga 1200's "Zorro" expansion port. The software you will install with help of the provided installers. This is much easier than "Plug and Play" on Win95. REVIEW Let start in April, I sent a mail to DataKompaniet (www.datakompaniet.no) and preordered a Blizzard603e+ (160Mhz with a 040/25), this gave me a 5% discount on the prise, which already was lower than I would have to pay if I had bought the card in sweden. While waiting for the delivery of the board I collected all the ELF based PowerPC programs for Amiga which I wanted to use like QuakePPC. I did download WarUP in case I would need it (haven't needed it yet and I hope I will not). When I opened the box from DataKompaniet I found a CD with games, which was included by DK (Sorry to say, but haven't managed to get anything to work on that CD), the PowerUP CD (this was in a "CD-envelope"), two disks, one named "SYSTEM DISK" and the other "SCSI DISK". Fist I took a look in the manual, which looked like a manual to a pirate copy of AutoCAD, but thinner, to see if I had to go and buy new simms or if I could use my 32MB simm from the Blizzard 030 board. To my supprise I could use different sizes of simms or one, as long as all the connected simms had the same access time. So I put in the 32MB simm and a 8MB simm from an 486/120Mhz (bought that one only to get the case and the CDR), now I had 40MB of fast RAM. Futher use of the manual was pointless, it didn't give much future information. I installed the board on the motherboard, somehow the system crashed everytime I booted from HD, it was due the latest VisualPrefs didn't work with Kickstart 3.0 (had softkicked 3.1 on my 030 board), it took a while before I understod that. When I at last got the computer to boot from HD, I did install everything from the disks by clicking on the "Install English" icons. I decided it was time to test the PowerPC and clicked on the QuakePPC icon. I wasn't disappointed, it was fast, even faster than on a firends P200, atleast it felt so after playing Quake on a 030/50Mhz. After a hour or two I quit to play for take a look at the PowerUP CD, there was alot of stuff, mostly CyberGraphiX stuff which requered that I did install CGX version 3 which works on AGA too. I should point out that by running CGX3 I saved approx 50kb of chipmem and this without using the option to move unused graphics to fastmem. Some of the programs didn't want to run as they wanted a newer version of the ppc.library, so I installed the requered version from the CD, but hell no, the programs wanted still to have a newer version (the same version which I had installed and no, I didn't forget to reboot). When you take version on the library it says a completly different version that what Phase5 claims it is. Other programs works only on 060 and some wanted MK3 boards (the B603 is MK1), so I got the feeling that this was a CD made more for CyberStorm604e owners. Last time I played with SCSI, then there wasn't any SCSI-2 or so, so I thought that that thinn cable connected to the board was how a standard SCSI-2 cable looked like, but guess my surprise when I was at my local computer dealer looking for a Zip-Drive (SCSI), the SCSI-2 cable look like the old SCSI cable. I asked if he had some cables of adaptors so I could connect the Zip to my board. He showed me everything he had, but nothing which would have made it possible to connect the internal Zip to my computer. The provided cable has an "MiniDB50" connector, which you connect to the board, and a Centronics-50, to which you can connect some external equipment. The cable is really short, in a tower it will not reach a 3.5/5.25 bay, nor will it reach the back of the computer so that you could have it as an external port. So I wrote to Phase5 and asked if they had a such cable which made it possible to connect SCSI & SCSI-2 devices, but the answer was that you have to ask your tower resalesman. As I already had done that, I decided to ask the seller of the board, DataKompaniet, but the answer was no, but they suggested me to buy 3 different types of cables and spend alot time, then I would make my own cable, but the price was close to 100 us-dollars. Next day I went to the northen europes largest electronic component reseller to see if I could get the requered parts to make my own cable which would cost less than $100. For the first, they didn't have any female MiniDB50 which could be connected to a flat-cable, so it looks like I have to buy those 3 cables to be able to connect a SCSI device to it. The board has a "Fast add on" port, to which the BlizzardVisionPPC graphics card will be connected. It will pe bossilbe to add other devices there as soon such has been developed, but I guess in that case you will need a passthru bus on the BVPPC which it prolly will not have. Another sad thing is that the BVPPC comes only in a 4MB version, while the CVPPC comes in both 4MB and 8MB version. I want to say, think carfully before you buy a Blizzard603e/603e+, for you can't upgrade the board a shit afterwards, you must buy a new one. The included SCSI is quite usless as it's to expensive to get a cable for it of the type needed in a tower, buy a faster 603e and a PCMCIA-SCSI card, as you will know it works. And be aware about that there is boards with a 040 without a FPU and you CAN'T use the 603e's FPU when using an MC680x0 program!!!! Oh, yes the MC68040 is clocked 24MHz and not 25Mhz, so you will not reach 20Mips with it. VALUE PLUS: Can have different sizes of simms Really fast when using PowerPC programs MINUS: It costs to much to connect internal SCSI devices. You can't upgrade the PowerPC or the Co-CPU I would give the B603e+ 3/5 while for a B603e (without SCSI) 4/5. COPYRIGHT Copyright 1998 J.O. Aho This review can be freely used in free-of-charge publications. To use this review for other purposes, please contact the author at the address trizt@iname.com