------------------------------------------------------------------------------
  Notes:  ProLiant BL e-Class C-GbE Interconnect Switch Firmware Version 2.0.0
------------------------------------------------------------------------------

- Usage information can be obtained from the following documentation:
    "HP ProLiant BL e-Class C-GbE Interconnect Switch User Guide"
    "HP ProLiant BL e-Class C-GbE Interconnect Switch Menu-driven Interface
     Reference Guide"
    "HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface
     Reference Guide"
    "HP ProLiant BL e-Class C-GbE Interconnect Switch Web-based Interface
     Reference Guide"
  This documentation is downloadable from the Web at www.compaq.com/support 

--------------------------------------------------------------------------
  Known Problems:  ProLiant BL e-Class C-GbE Switch Firmware Version 2.0.0
--------------------------------------------------------------------------

- Resetting to factory defaults and saving IP settings will change
  the switch set up from DHCP to manual IP setting. If you are using
  DHCP to establish your IP address, use the "Reboot & Load Factory
  Default Configuration" option instead of "Reboot & Load Factory
  Default Configuration Except IP Address."

- If you enter a list of Security IP addresses, SNMP querries only work for the
  first 3 entries. Telnet and Web connections work properly for all entries.

- The default SNMP rwcommunity string is "private." Please change this on 
  initial configuration of the switch, if it does not meet your security needs.
  See the configuration chapters of the user guide for more information.

- Poor performance may be encountered when flow control is enabled on Gigabit 
  uplinks.  In some test cases, maximum throughput was reduced by 50% with flow
  Control enabled on the Gigabit uplinks.

  Disabling flow control on the switch Gigabit uplink ports or the network 
  switch or server directly connected to the switch Gagabit uplink ports does 
  resolve the problem.

- When an XML file is downloaded via the Web interface, the switch reboots. 
  If a switch reboot when downloading a new configuration file is not wanted, 
  use the command line or menu interfaces.

--------------------------------------------------------------------------
 2002, 2003 Hewlett-Packard Development Company, L.P.