IBM ThinkPad                                          November 4, 2003
Intel(R) PRO/100/1000 LAN Adapter Software (Ethernet Driver)
for DOS, Windows 98/98 SE/NT 4.0/2000/XP and OS/2

Release (Build 66706)
======================================================================

Notice:
-------
This program is language independent and can be used with any language
system.

What This Package Does
----------------------
This package provides the Ethernet driver for DOS(*1),
Windows 98/98 SE/NT 4.0/2000/XP and OS/2.
The Ethernet driver enables or updates the Ethernet function of the
following adapters on the following ThinkPad computers.
One of the following Ethernet device is integrated into your ThinkPad
depending on your ThinkPad model.

  - Intel(R) PRO/100 VE Network Connection (10/100 Ethernet)
  or
  - Intel(R) PRO/1000 MT Mobile Connection (Giganet Ethernet)

This release supports the following systems:

  - ThinkPad R40 (10/100 Ethernet)
  - ThinkPad R50(*2)(*3), R50p(*2)(*3)
  - ThinkPad T40, T40p(*2)(*3), T41, T41p(*2)(*3)
  - ThinkPad X31(*2)
   NOTES
   *1: The DOS driver is included only for unattended installation
       purpose.
   *2: OS/2 is not supported.
   *3: Only Windows 2000/XP and DOS are supported.


To determine if you should update the Ethernet driver, refer to the
"Summary of Changes" section.

To update the Ethernet driver, refer to the "Installation Instructions"
section.


Released Versions
-----------------
Release (Build 53136)  Initial release for ThinkPad R40
Release (Build 56890)  Initial release for ThinkPad X31, T40, and T40p.
Release (Build 60299)  A Gigabit Ethernet problem fix in Windows XP
Release (Build 66706)  Initial release for ThinkPad T41 and R50.


Summary of Changes
------------------
Where: <bbbbb> Build number (for example, 53136 means Build 53136)
       (New)   New function or enhancement
       (Fix)   Correction to existing function

<53136>
 - (New) Initial release for ThinkPad R40

<56890>
 - (New) Initial release for ThinkPad X31, T40, and T40p
 - (New) Device driver for "Intel(R) PRO/100 VE Network Connection"
         in Windows 98 (Retail Version 4.10.1998) is added
 - (New) Device driver for "Intel(R) PRO/1000 MT Mobile Connection"
         is added

<60299>
 - (Fix) An intermittent network disconnection problem after resuming
         the computer from suspend or hibernation in Windows XP with
         Gigabit Ethernet when fixed IP address is used.
         (Intel(R) PRO/1000 MT Mobile Connection)

<66706>
 - (New) Initial release for ThinkPad T41 and R50
 - (New) Initial release for ThinkPad T41p and R50p


Installation Instructions
-------------------------
NOTE: ThinkPad Software Installer provides install/(uninstall) wizard
for the device driver and for Intel PROSet in the following operating
systems:
- Windows 98/98 SE
- Windows 2000
- Windows XP

NOTE: Before upgrading Intel(R) PROSet, you have to uninstall the current
PROSet that is installed on your ThinkPad.


Windows 98/98 SE
UPDATE INSTALL:
To update the driver,

 1. Extract this package onto your hard disk drive.
 2. Start Windows 98/98 SE.
 3. Click Start, select Settings, and click Control Panel.
 4. Double-click System icon.
 5. Click Device Manager tab.
 6. Click + mark to expand Network adapters.
 7. Right-click one of the following devices in Network adapters
    and click Properties.
    Intel(R) PRO/100 VE Network Connection
    Intel(R) PRO/1000 MT Mobile Connection
 8. Click the Driver tab.
 9. Click the Update Driver... button.
10. Click the Next button in the Update Device Driver Wizard dialog box.
11. Select Search for a better driver than the one your device is
    using now. (Recommended).
12. Click the Next button.
13. Select Specify a location: only.
14. Specify the path to one of the following sub-directories with the         full path name where you extracted the package in step 1 in Specify 
    a location:.
    PRO100\WIN98-ME (for Intel(R) PRO/100 VE Network Connection in Windows 98 SE)
    PRO100\WIN98-ME\98Retail (for Intel(R) PRO/100 VE Network Connection
    in Windows 98 Retail Version 4.10.1998)
    PRO1000\WIN98-ME\WIN98 (for Intel(R) PRO/1000 MT Mobile Connection)
15. Click the Next button.
16. Click the Next button.
17. Click the Next button.
    The driver installation starts.
18. Click Finish button when the installation completes.
19. Click Yes when prompted to restart the computer.

CLEAN INSTALL: (Add New Hardware Wizard)
If this is the first time to boot Windows 98/98 SE, the operating
system detects the Ethernet Controller automatically.  To install the device driver, follow the instructions below.

 1. Extract this package onto your hard disk drive.
 2. Start Windows 98/98 SE. The Add New Hardware Wizard dialog box is
    displayed.
 3. Click the Next button.
 4. Select Search for the best driver for your device. (recommended).
 5. Click the Next button.
 6. Select Specify a location: only.
 7. Specify the path to one of the following sub-directories with the
    full path name where you extracted the package in step 1 in Specify
    a location:.
    PRO100\WIN98-ME (for Intel(R) PRO/100 VE Network Connection in Windows 98 SE)
    PRO100\WIN98-ME\98Retail (for Intel(R) PRO/100 VE Network Connection
    in Windows 98 Retail Version 4.10.1998)
    PRO1000\WIN98-ME\WIN98 (for Intel(R) PRO/1000 MT Mobile Connection)
 9. Click the Next button.
10. Click the Next button.
11. Click the Next button.
    The driver installation starts.
12. Click Finish button when the installation completes.
13. Click Yes when prompted to restart the computer.

CLEAN INSTALL: (PCI Ethernet Controller in Other devices)
Windows 98/98 SE detected the PCI Ethernet Controller, but was not able 
to find the correct device driver.  In this case, you will see Ethernet
Controller in Other devices in Device Manager.  To install the
driver, follow the instructions below.

 1. Extract this package onto your hard disk drive.
 2. Start Windows 98/98 SE.
 3. Click Start, select Settings, and click Control Panel.
 4. Double-click the System icon.
 5. Click the Device Manager tab.
 6. Right-click PCI Ethernet Controller in Other devices and click
    Properties.
 7. Click the Driver tab.
 8. Click the Update Driver... button.
 9. Click the Next button in Update Device Driver Wizard dialog box.
10. Select Search for a better driver than the one your device is
    using now. (recommended).
11. Click the Next button.
12. Select Specify a location: only.
13. Specify the path to one of the following sub-directories with the 
    full path name where you extracted the package in step 1 in Specify
    a location:.
    PRO100\WIN98-ME (for Intel(R) PRO/100 VE Network Connection in 
    Windows 98 SE)
    PRO100\WIN98-ME\98Retail (for Intel(R) PRO/100 VE Network Connection
    in Windows 98 Retail Version 4.10.1998)
    PRO1000\WIN98-ME\WIN98 (for Intel(R) PRO/1000 MT Mobile Connection)
14. Click the Next button.
15. Click the Next button.
16. Click the Next button.
    The driver installation starts.
17. Click Finish button when the installation completes.
18. Click Yes when prompted to restart the computer.


Windows NT 4.0
UPDATE INSTALL:
To update the device driver and power management driver,

Ethernet Device Driver
 1. Extract this package onto your hard disk drive.
 2. Start Windows NT 4.0.
 3. Click Start, select Settings, and click Control Panel.
 4. Double-click the Network icon.
 5. Click the Adapters tab.
 6. Select one of the following devices.
    Intel(R) PRO/100 VE Network Connection
    Intel(R) PRO/1000 MT Mobile Connection
 7. Click the Update button.
 8. Specify the path to one of the following sub-directories with the 
    full path name where you extracted the package in step 1 in Windows 
    NT Setup dialog box.
    PRO100\WINNT4 (for Intel(R) PRO/100 VE Network Connection)
    PRO1000\WINNT4 (for Intel(R) PRO/1000 MT Mobile Connection)
 9. Click the Continue button.
10. Click the Close button.
11. Click Yes when prompted to restart the computer.

Ethernet Power Management Driver (NDIS PM Interface)
 a. Start Windows NT 4.0.
 b. Click Start, select Settings, and click Control Panel.
 c. Double-click the Network icon.
 d. Click the Services tab.
 e. Select NDIS PM Interface.
 f. Click the Update button.
 g. Specify the path to sub-directory NPMINT40 with the full path name 
    where you extracted the package in step 1 in Insert Disk dialog box.
 h. Click the Continue button.
 i. Click the Close button.
 j. Click Yes when prompted to restart the computer.

CLEAN INSTALL:

Ethernet Device Driver
 1. Extract this package onto your hard disk drive.
 2. Start Windows NT 4.0.
 3. Click Start, select Settings, and click Control Panel.
 4. Double-click the Network icon.  It displays Network Configuration 
    dialog box if this is the first time to configure the Network.  If 
    not, go to step 20.

First Network Configuration
 5. Click the Yes button.
 6. Select Wired to the network.
 7. Click the Next button.
 8. Click the Select from list button.
 9. Click the Have Disk... button.
10. Specify the path to one of the following sub-directories with the 
    full path name where you extracted the package in step 1 in Insert 
    Disk dialog box.
    PRO100\WINNT4 (for Intel(R) PRO/100 VE Network Connection)
    PRO1000\WINNT4 (for Intel(R) PRO/1000 MT Mobile Connection)
11. Click the OK button.
12. Select one of the following adapters.
    Intel(R) PRO/100 Family Adapter (for Intel(R) PRO/100 VE Network 
    Connection)
    Intel(R) PRO/1000 Family Adapter (for Intel(R) PRO/1000 MT Mobile 
    Connection)
13. Click the OK button.
14. Click the Next button.
15. Follow the instructions displayed on the screen.
16. Follow the prompts for any Windows NT installation disks by
    typing the path to the directory that contains Windows NT files.
    (It is usually c:\i386 directory or Windows NT CD-ROM's x:\i386
    directory.)
17. Follow the instructions displayed on the screen.
18. Click the Finish button when the installation completes.
19. Click Yes when prompted to restart the computer.

Add Ethernet to Network Configuration
20. Click the Adapters tab.
21. Click the Add button.
22. Click the Have Disk... button.
23. Specify the path to one of the following sub-directories with the 
    full path name where you extracted the package in step 1 in Insert 
    Disk dialog box.
    PRO100\WINNT4 (for Intel(R) PRO/100 VE Network Connection)
    PRO1000\WINNT4 (for Intel(R) PRO/1000 MT Mobile Connection)
24. Click the OK button.
25. Select one of the following adapters.
    Intel(R) PRO/100 Family Adapter (for Intel(R) PRO/100 VE Network 
    Connection)
    Intel(R) PRO/1000 Family Adapter (for Intel(R) PRO/1000 MT Mobile 
    Connection)
26. Click the OK button.
27. Click the Close button.
28. Follow the instructions displayed on the screen.
29. Click Yes when prompted to restart the computer.

Ethernet Power Management Driver (NDIS PM Interface)
 a. Start Windows NT 4.0.
 b. Click Start, select Settings, and click Control Panel.
 c. Double-click the Network icon.
 d. Click the Protocols tab.
 e. Click the Add button.
 f. Click the Have Disk... button.
 g. Specify the path to sub-directory NPMINT40 with the full path name 
    where you extracted the package in step 1 in Insert Disk dialog box.
 h. Click the OK button.
 i. Select NDIS PM Interface.
 j. Click the OK button.
 k. Click the Close button.
 l. Click Yes when prompted to restart the computer.


Windows 2000
UPDATE INSTALL:
To update the driver,

 1. Extract this package onto your hard disk drive.
 2. Start Windows 2000.
 3. Click Start, select Settings, and click Control Panel.
 4. Double-click the System icon.
 5. Click the Hardware tab.
 6. Click the Device Manager... button
 7. Click the + mark to expand Network adapters.
 8. Right-click one of the following devices in Network adapters and
    click Properties.
    Intel(R) PRO/100 VE Network Connection
    Intel(R) PRO/1000 MT Mobile Connection
 9. Click the Driver tab.
10. Click the Update Driver... button.
11. Click the Next button in Upgrade Device Driver Wizard dialog box.
12. Select Search for a suitable driver for my device (recommended).
13. Click the Next button.
14. Select Specify a location only in Optional search locations:.
15. Click the Next button.
16. Specify the path to one of the following sub-directories with the 
    full path name where you extracted the package in step 1 in Copy 
    manufacturer's files from:.
    PRO100\WIN2K (for Intel(R) PRO/100 VE Network Connection)
    PRO1000\WIN2K (for Intel(R) PRO/1000 MT Mobile Connection)
17. Click the OK button.
18. Click the Next button.
    The driver installation starts.
19. Click the Finish button when the installation completes.
20. Click Yes when prompted to restart the computer.

CLEAN INSTALL: (Found New Hardware Wizard)
If this is the first time to boot Windows 2000, the OS detects the
Ethernet Controller automatically.  To install the device driver, follow the instructions below.

 1. Extract this package onto your hard drive.
 2. Start Windows 2000. It displays Found New Hardware Wizard dialog box.
 3. Click the Next button.
 4. Select Search for a suitable driver for my device (recommended).
 5. Click the Next button.
 6. Select Specify a location only in Optional search locations:.
 7. Click the Next button.
 8. Specify the path to one of the following sub-directories with the 
    full path name where you extracted the package in step 1 in Copy 
    manufacturer's files from:.
    PRO100\WIN2K (for Intel(R) PRO/100 VE Network Connection)
    PRO1000\WIN2K (for Intel(R) PRO/1000 MT Mobile Connection)
 9. Click the OK button.
10. Click the Next button.
    The driver installation starts.
11. Click the Finish button when the installation completes.
12. Click Yes when prompted to restart the computer.

CLEAN INSTALL: (Ethernet Controller in Other devices)
Windows 2000 detected the Ethernet Controller, but was not able to
find the correct device driver.  In this case, you will see Ethernet
Controller in Other devices in Device Manager.  To install the
driver, follow the instructions below.

 1. Extract this package onto your hard drive.
 2. Start Windows 2000.
 3. Click Start, select Settings, and click Control Panel.
 4. Double-click the System icon.
 5. Click the Hardware tab.
 6. Click the Device Manager... button.
 7. Right-click the Ethernet Controller in Other devices and click
    Properties.
 8. Click the Driver tab.
 9. Click the Update Driver... button.
10. Click the Next button in Upgrade Device Driver Wizard dialog box.
11. Select Search for a suitable driver for my device (recommended).
12. Click the Next button.
13. Select Specify a location only in Optional search locations:.
14. Click the Next button.
15. Specify the path to one of the following sub-directories with the 
    full path name where you extracted the package in step 1 in Copy 
    manufacturer's files from:.
    PRO100\WIN2K (for Intel(R) PRO/100 VE Network Connection)
    PRO1000\WIN2K (for Intel(R) PRO/1000 MT Mobile Connection)
16. Click the OK button.
17. Click the Next button.
    The driver installation starts.
18. Click the Finish button when the installation completes.
19. Click Yes when prompted to restart the computer.


Windows XP
UPDATE INSTALL:
To update the driver,

 1. Extract this package onto your hard drive.
 2. Start Windows XP.
 3. Click Start and Control Panel.
 4. Click the Performance and Maintenance and System icon.
 5. Click the Hardware tab.
 6. Click the Device Manager button.
 7. Click the + mark to expand Network adapters.
 8. Right-click one of the following devices in Network adapters
    and click Properties.
    Intel(R) PRO/100 VE Network Connection
    Intel(R) PRO/1000 MT Mobile Connection
 9. Click the Driver tab.
10. Click the Update Driver... button.
11. Select Install from a list or specific location (Advanced)
12. Click the Next button in Hardware Upgrade Wizard dialog box.
13. Select Search for the best driver in these locations. and
    Include this location in the search: only.
14. Specify the path to one of the following sub-directories with the 
    full path name where you extracted the package in step 1 in Include 
    this location in the search:.
    PRO100\WINXP32 (for Intel(R) PRO/100 VE Network Connection)
    PRO1000\WINXP32 (for Intel(R) PRO/1000 MT Mobile Connection)
15. Click the Next button.
    The driver installation starts.
16. Click the Finish button when the installation completes.
17. Click the Close button.

CLEAN INSTALL: (Found New Hardware Wizard)
If this is the first time to boot Windows XP, the OS detects the Ethernet Controller automatically.  To install the device driver, follow the instructions below.

 1. Extract this package onto your hard drive.
 2. Start Windows XP.
 3. It displays Found New Hardware Wizard dialog box.
 4. Select Install from a list or specific location (Advanced)
 5. Click the Next button in Found New Hardware Wizard dialog box.
 6. Select Search for the best driver in these locations. and
    Include this location in the search: only.
 7. Specify the path to one of the following sub-directories with the 
    full path name where you extracted the package in step 1 in Include 
    this location in the search:.
    PRO100\WINXP32 (for Intel(R) PRO/100 VE Network Connection)
    PRO1000\WINXP32 (for Intel(R) PRO/1000 MT Mobile Connection)
 8. Click the Next button.
    The driver installation starts.
 9. Click the Finish button when the installation completes.

CLEAN INSTALL: (Ethernet Controller in Other devices)
Windows XP detected the Ethernet Controller, but was not able to find the 
correct device driver.  In this case, you will see Ethernet Controller in 
Other devices in Device Manager.  To install the driver, follow the 
instructions below.

 1. Extract this package onto your hard drive.
 2. Start Windows XP.
 3. Click Start and Control Panel.
 4. Click the Performance and Maintenance and System icon.
 5. Click the Hardware tab.
 6. Click the Device Manager button.
 7. Right-click Ethernet Controller in Other devices and click
    properties.
 8. Click the Driver tab.
 9. Click the Update Driver... button.
10. Select Install from a list or specific location (Advanced)
11. Click the Next button in Hardware Upgrade Wizard dialog box.
12. Select Search for the best driver in these locations. and
    Include this location in the search: only.
13. Specify the path to one of the following sub-directories with the 
    full path name where you extracted the package in step 1 in Include 
    this location in the search:.
    PRO100\WINXP32 (for Intel(R) PRO/100 VE Network Connection)
    PRO1000\WINXP32 (for Intel(R) PRO/1000 MT Mobile Connection)
14. Click the Next button.
    The driver installation starts.
15. Click the Finish button when the installation completes.
16. Click the Close button.


Intel PROSet Installation
-------------------------
Windows 98/98 SE, 2000, and XP

 1. Execute PROSet.exe in one of the following folders per your operating 
    system that you are using on your ThinkPad.
    \APPS\PROSet\WIN98SEME (Windows 98/98 SE)
    \APPS\PROSet\WIN2K     (Windows 2000)
    \APPS\PROSet\WINXP32   (Windows XP)
 2. Click the Next button.
 6. Click I accept the terms in the license agreement and click the Next
    button.
 7. Select Typical and click the Next button.
 8. Click the Install button.
 9. Click the Finish button.

NOTE: PROSet II is installed in Windows 98/98 SE.

NT 4.0

The device driver installation installs Intel PROSet II automatically.


Unattended Installation
-----------------------
DOS driver for unattended installation:
For customers who need unattended installation, the following DOS drivers 
are included in this package.
E100B.DOS in PRO100\DOS sub-directory for Intel(R) PRO/100 VE Network 
Connection
E1000.DOS in PRO1000\DOS sub-directory for Intel(R) PRO/1000 MT Mobile 
Connection

Unattended installation instructions are also included in APPS\SETUP\PUSH
sub-directory.  The DOS driver can be used only for this purpose.


OS/2
----
NOTE: OS/2 support is provided only to ThinkPad T40 series.

The OS/2 device drivers are located in the following folders:

UPDATE INSTALL:
 1. Double click the OS/2 System icon on the desktop.
 2. Double click the System Setup icon.
 3. Double click the MPTS Network Adapters and Protocol Services icon.
 4. Click the Configure button in Multi-Protocol Transport Services.
 5. Confirm that LAN adapters and protocols is selected and click the 
    Configure button.
 6. Click the Other adapters... button.
 7. Type the path to one of the following sub-directories with the full 
    path name and click the OK button.
    \PRO100\OS2 (10/100 Ethernet)
    \PRO1000\OS2 (Gigabit Ethernet)
 8. Select one of the following Ethernet adapters in Network Adapters per 
    your Ethernet device.
    Intel(R) PRO PCI Adapter (10/100 Ethernet)
    Intel(R) 8254X Based Network Connection (Gigabit Ethernet)
 9. Click the Change button.
10. Click the Yes button in Change Network Adapter.
11. Click the OK button to close Adapters and Protocol Configuration.
12. Click the Close button to close Configure.
13. Click Exit to close Multi-Protocol Transport Services.
14. Confirm that Update CONFIG.SYS is selected and click Exit.
15. CONFIG.SYS Updated to be displayed and then click the OK button.
16. Click the Exit button to exit MPTS.
17. Reboot the system.

CLEAN INSTALL:
 1. Double click the OS/2 System icon on the desktop.
 2. Double click the System Setup icon.
 3. Double click the MPTS Network Adapters and Protocol Services icon.
 4. Click the Configure button on Multi-Protocol Transport Services.
 5. Confirm that LAN adapters and protocols is selected and click the 
    Configure button.
 6. Click the Other adapters... button.
 7. Type the path to one of the following sub-directories with the full 
    path name and click the OK button.
    \PRO100\OS2 (10/100 Ethernet)
    \PRO1000\OS2 (Gigabit Ethernet)
 8. Select one of the following Ethernet adapter in Network Adapters per 
    your Ethernet device.
    Intel(R) PRO PCI Adapter (10/100 Ethernet)
    Intel(R) 8254X Based Network Connection (Gigabit Ethernet)
 9. Click the Add button.
10. Add Protocols as required for your network.
11. Click the OK button to close Adapters and Protocol Configuration.
12. Click the Close button to close Configure.
13. Click Exit to close Multi-Protocol Transport Services.
14. Confirm that Update CONFIG.SYS is selected and then click Exit.
15. CONFIG.SYS Updated to be displayed and then click the OK button.
16. Click the Exit button to exit MPTS.
17. Reboot the system.


Determining which version is installed for 10/100 Ethernet
----------------------------------------------------------
(Windows 98/98 SE/NT 4.0/2000/XP)
NDIS       File Name       Version
----       -------------   -------
NDIS4:      E100bnt.sys     6.4.14.1
NDIS5:      E100bnt5.sys    6.4.14.61 (Windows 98 Retail Version
                                       4.10.1998)
NDIS5:      E100bnt5.sys    6.4.14
NDIS5.1:    E100b325.sys    6.4.14.30

DOS NDIS2:  E100b.dos       4.35
OS/2 NDIS2: E100b.dos       4.35
DOS ODI:    E100BODI.COM    4.02

The following operating systems use one of the listed NDIS device
drivers.

Windows 98/98 SE: E100bnt5.sys
Windows NT 4.0:   E100bnt.sys
Windows 2000:     E100bnt5.sys
Windows XP:       E100b325.sys

Determine which version is installed for Gigabit Ethernet
---------------------------------------------------------
NDIS       File Name       Version
----       ---------       -------
NDIS4:      E1000NT4.sys    6.4.16.33
NDIS5:      e1000w9x.sys    6.4.16.33
NDIS5:      E1000NT5.SYS    6.4.16.33
NDIS51:     E1000325.SYS    6.4.16.34

DOS NDIS2:  e1000.dos       2.20
OS/2 NDIS2: e1000.os2       2.20
DOSODI:     e1000odi.com    1.34

The following operating systems use one of the listed NDIS device drivers.

Windows NT 4.0:   E1000NT4.sys    
Windows 98/98 SE: e1000w9x.sys    
Windows 2000:     E1000NT5.SYS    
Windows XP:       E1000325.SYS    

To check the version of the device driver that is installed on your
system, follow the instructions below:

1. Right-click the My Computer icon.
2. Click Find.
3. Type one of the NDIS driver names in Named: field.  For example,
   if you are using Windows 2000, type E100bnt5.sys in the field.
4. Click the Find Now button.
5. It lists the NDIS driver(s).
   If it does not list the NDIS driver, the Ethernet device driver is
   not installed in your system.
6. Right-click the NDIS driver that is found in the Windows folder.
7. Click the Properties.
8. Click the Version tab.
9. Click the Product Version in the Items name: field.

DOS NDIS2:
1. Find the file E100b.dos (10/100 Ethernet) or e1000.dos (Gigabit Ethernet).
2. To determine if a driver update is needed, check the date of the
   driver file.  If the date is older than the date below, then you need
   to update your driver.
	04/29/2002 (10/100 Ethernet)
	01/24/2003 (Gigabit Ethernet)

DOS ODI:
1. Find the file E100BODI.COM (10/100 Ethernet) or e1000odi.com (Gigabit Ethernet).
2. Execute it in DOS environment, it shows the following version information.
	Intel(R) PRO PCI Adapter v4.01 (011130) (10/100 Ethernet)
	Intel(R) 8254X Based Network Connection v1.34 (030124) (Gigabit Ethernet)

OS/2 NDIS2:
While the OS is booting and after OS/2 WARP logo screen, you can see one of the
following lines in text mode:
   Intel(R) PRO PCI Adapter Driver v4.35 042902 (10/100 Ethernet)
   Intel(R) 8254x-based Network Connection Driver v2.20 012403 (Gigabit Ethernet)


Trademarks
----------
* IBM, OS/2 and ThinkPad are registered trademarks of IBM Corporation.

* Intel is a registered trademark of Intel Corporation.
* Microsoft, Windows and Windows NT are registered trademarks of
  Microsoft Corporation.

Other company, product, and service names may be registered trademarks,
trademarks or service marks of others.