IBM ThinkPad                                          November 9, 2001
ThinkPad Ethernet Features II for Windows NT 4.0

Version 5.40.11.0
======================================================================

Notice:
-------
This program is language independent and can be used with any language 
system.


What This Package Does
-----------------------
This package provides the Ethernet driver for Windows NT users.

This release supports the following systems:

   - ThinkPad R30


To determine if you need to update the Ethernet driver, refer to
the "Summary of Changes" section below.

To update the Ethernet driver, refer to the "Installation instructions" 
section below.

Released Version
----------------
Version 5.40.11.0       Initial release


Summary of Changes
------------------
  Key: <n.nn>  Program version (for example, 1.00 means Version 1.00)
        (New)  New function or enhancement
        (Fix)  Correction to existing function

<5.40.11.0>
- (New) Support for ThinkPad R30


Installation instructions
-------------------------
Windows NT 4.0

Update installation:
To update the device driver and power management driver,

Ethernet device driver
 1. Start Windows NT and log on with a user ID authorized as an 
    administrator.  
 2. Extract this package onto the hard disk drive.
 3. Click Start, select Settings, then click Control Panel.
 4. Double-click the Network icon.
 5. Click the Adapters tab.
 6. Select Intel 8255x-based PCI Ethernet Adapter (10/100)
 7. Click the Update button.
 8. Specify the directory name with the full path name where you
    extracted the package in the step 2 in Insert Disk dialog box.
    (For example: C:\DRIVERS\WNT\ETHERNET\DRIVER)
 9. Click the Continue button.
10. Click the Close button.
11. Click Yes when prompted to restart the computer.

Ethernet Power Management driver (NDIS PM Interface)
 1. Start Windows NT and log on with a user ID authorized as an 
    administrator.
 2. Click Start, select Settings, then click Control Panel.
 3. Double-click the Network icon.
 4. Click the Services tab.
 5. Select NDIS PM Interface.
 6. Click the Update button.
 7. Specify the path to sub-directory PMDRIVER of the directory that
    contains the driver in the step 2 in Windows NT Setup dialog box.
    (For example:  C:\DRIVERS\WNT\ETHERNET\PMDRIVER)
 8. Click the Continue button.
 9. Click the Close button.
10. Click Yes when prompted to restart the computer.


Clean install:

Ethernet Device Driver
 1. Start Windows NT and log on with a user ID authorized as an 
    administrator.
 2. Extract this package onto the hard disk drive.
 3. Click Start, select Settings, then click Control Panel.
 4. Double-click the Network icon.
 5. It displays Network Configuration dialog box if this is the
    first time to configure the Network. If not, go to step 21.

First Network Configuration
 6. Click the Yes button.
 7. Select Wired to the network.
 8. Click the Next button.
 9. Click the Select from list button.
10. Click the Have Disk button.
11. Specify the directory name with the full path name where you
    extracted the package in the step 2 in Insert Disk dialog box.
    (For example: C:\DRIVERS\WNT\ETHERNET\DRIVER)
12. Click the OK button.
13. Select Intel(R) PRO Adapter.
14. Click the OK button.
15. Click the Next button.
16. Follow the instructions displayed on the screen.
17. Follow the prompts for any Windows NT installation disks by
    typing the path to the directory that contains Windows NT files.
    (It is usually c:\i386 directory or Windows NT CD-ROM's x:\i386
    directory.)
18. Follow the instructions displayed on the screen.
19. Click the Finish button when the installation completes.
20. Click Yes when prompted to restart the computer.

Add  Ethernet to Network Configuration
21. Click the Adapters tab.
22. Click the Add button.
23. Click the Have Disk button.
24. Specify the directory name with the full path name where you
    extracted the package in the step 2 in Insert Disk dialog box.
    (For example: C:\DRIVERS\WNT\ETHERNET\DRIVER)
25. Click the OK button.
26. Select Intel(R) PRO Adapter.
27. Click the OK button.
28. Click the Close button.
29. Follow the instructions displayed on the screen.
30. Click Yes when prompted to restart the computer.

Ethernet Power Management Driver (NDIS PM Interface)
 1. Start Windows NT and log on with the user ID authorized as 
    an administrator.
 2. Click Start, select Settings, then click Control Panel.
 3. Double-click the Network icon.
 4. Click the Protocols tab.
 5. Click the Add button.
 6. Click the Have Disk button.
 7. Specify the path to sub-directory PMDRIVER of the directory that
    contains the driver in the step 2 in Insert Disk dialog box.
    e.g. C:\DRIVERS\WNT\ETHERNET\PMDRIVER
 8. Click the OK button.
 9. Select NDIS PM Interface.
10. Click the OK button.
11. Click the Close button.
12. Click Yes when prompted to restart the computer.


Determining which version is installed
--------------------------------------
 1. Start Windows NT.
 2. Click Start, select Settings, then click Control Panel.
 3. Double-click Intel(R) PROSet II.
 4. Click the Network Driver tab.
 5. The File version will be displayed at Driver Information in the 
    message box.


Trademarks
----------
IBM and ThinkPad are trademarks of IBM Corporation.
Windows is a trademark of Microsoft Corporation.

Other company, product, and service names may be registered
trademarks, trademarks or service marks of others.