IBM ThinkPad December 04, 1997 OS/2 Warp Version 4 Install Disk 1 Update and Install Disk 2 Update Version 1.00 ======================================================================= What This Diskette Does ----------------------- The IBM ThinkPad OS/2 Warp Version 4 Install Disk 1 Update is a replacement of IBM OS/2 Warp Version 4 Install Disk 1. This disk fixes the following problems. - OS/2 Warp Version 4 cannot be installed on harddisks that have over 4.3GB capacity - When ThinkPad 770 is docked to SelectaDock III and an IDE device in SelectaDock III is assigned to secondary IDE channel, the IDE device is not recognized. The following model is supported: - ThinkPad 770 - ThinkPad 560X - ThinkPad 380XD, 385XD Released Versions ----------------- Version 1.00 Initial release Summary of Changes ------------------ Where: Diskette version (for example, 1.00 means Version 1.00) (New) New function or enhancement (Fix) Correction to existing function <1.00> - (New) COPYFROMFLOPPY=1 added in CONFIG.SYS. IBM1S506.ADD updated. DOSCALL1.DLL updated. Installation Guide ------------------ OS/2 Warp Version 4 comes with three diskettes for installation. This update disk is a replacement for "Disk 1". 1. Install OS/2 Warp Version 4 from the original Install Disk. 2. When you are prompted to insert Disk 1, use 'Install Disk1 Update'. 3. When you are prompted to insert Disk 2, use 'Install Disk2 Update'. 4. Continue installing OS/2 Warp Version 4. The information is available from the following web site. http://service.software.ibm.com/os2ddpak/index.htm When the home page appears, do the following. (The procedure is subject to change without prior notice) 1. Click on "Yes, I agree. Show the Device Category List..." 2. Click on "OS/2 Component Updates" 3. Click on "Installation Diskette Update" 4. Click on "> 4.3GB IDE Hardfile Support" 5. Follow the instructions Trademarks and Service marks ---------------------------- IBM, OS/2 and ThinkPad are trademarks of IBM Corporation.