IBM ThinkPad December 23, 2003 IBM 11a/b/g Wireless LAN Mini PCI Adapter Software for Windows 98 SE/NT 4.0/2000/XP for ThinkPad Driver Version 2.4.1.10 ====================================================================== WHAT THIS PACKAGE DOES ---------------------- This package provides the Wireless LAN driver, Utility Software for the following Wireless LAN adapters for Microsoft Windows 98 SE/NT 4.0/2000/XP. - IBM Dual-Band Wi-Fi Wireless Mini-PCI Adapter - IBM 11a/b/g Wireless LAN Mini PCI Adapter This release supports the following systems: - ThinkPad R40 - ThinkPad R50(*1)/R50p(*1) - ThinkPad T40/T41/T41p(*1) - ThinkPad T40p(*1) - ThinkPad X31 - ThinkPad X40(*1) (Note) *1: Supports Windows 2000/XP. (Note) To utilize CCX and WPA wireless connections, wireless adapter software for your wireless adapter and Access Connections should be updated as follows. - IBM 11a/b/g Wireless LAN Mini PCI Adapter Software ver 2.4.1.7 or later - IBM Access Connections ver 2.70 or later With this configuration, CCX and WPA wireless connections can be enabled on the following wireless LAN cards. - IBM Dual-Band Wi-Fi Wireless Mini-PCI Adapter - IBM 11a/b/g Wireless LAN Mini PCI Adapter Please follow the instructions below when you install wireless adapter software and Access Connections. -Before updating the wireless adapter software, please uninstall the IBM Access Connections if already installed: 1. Start Windows XP/2000 and logon with administrative privileges. 2. Click "Start", "Settings", then "Control Panel" 3. Click "Add/Remove Programs" or "Add or Remove Programs" 4. Click "IBM Access Connections" if it is listed under "Currently installed programs" 5. Click "Change/Remove" or "Remove" and follow the instructions on the screen. -If you currently use IEEE 802.1x authentication on Windows XP Service Pack 1, IBM recommends to uninstall Q815485 (WPA Wireless Security Update in Windows XP ) if you do not use WPA security feature. To check if the Q815485 is installed and to uninstall it: 1. Start Windows XP and logon with administrative privileges. 2. Click "Start", "Settings", then "Control Panel" 3. Click "Add or Remove Programs" 4. Click "Windows XP Hotfix (SP2) Q815485" if it is listed under "Currently installed programs" 5. Click "Remove" and follow the instructions on the screen. -If you use Windows 2000, please stop the Microsoft Wireless Configuration service if already installed. To check if the service is installed and to stop it: 1. Start Windows 2000 and logon with administrative privileges. 2. Click "Start", "Settings", then "Control Panel" 3. Double-click "Administrative Tools" then "Services" 4. Double-click "Wireless Configuration" if it is listed. 5. Change "Startup type" to "Disabled" if it is not. 6. Click "OK" To determine if you should update the Wireless LAN driver, refer to the "Summary of Changes" section. To update the Wireless LAN driver, refer to the "Installation Instructions" section. RELEASED VERSIONS ----------------- Version 2.1.10.0 Supports ThinkPad R40 Version 2.1.10.0 Added support for ThinkPad T40/T40p, ThinkPad X31 Version 2.3.0.4 Problem fix Version 2.4.1.4 Added support for WPA and CCX Version 2.4.1.6 Problem fix Version 2.4.1.7 Added support for ThinkPad R50, ThinkPad T41 Version 2.4.1.9 Added support for ThinkPad R50p, ThinkPad T41p Version 2.4.1.10 Added support for ThinkPad X40 SUMMARY OF CHANGES ------------------ Where: Build number (for example, 21246 means Build 21246) (New) New function or enhancement (Fix) Correction to existing function <2.1.10.0/1QWC24WW> - (New) Initial release for ThinkPad R40 Note: Version of Windows NT 4.0 Configuration Utility in this release is ver.2.3. <2.1.10.0/1QWC25WW> - (New) Added support for ThinkPad T40/T40p, ThinkPad X31 - (Fix) Status icon color not changing immediately with a wrong wep key under Windows NT 4.0 Note: Only the Configuration Utility, when used under Windows NT 4.0, has been updated at this release. Driver itself was not changed from previous version If you use Widows 98 SE/2000/XP and Previous version (2.1.10.0/1QWC24WW) is installed, You do not need to update the driver. Version of Configuration Utility (Windows NT 4.0) in this release is ver.2.4. <2.3.0.4/1QWC27WW> - (Fix) Cannot connect to network with some APs when SSID is not broadcasted - (Fix) Takes more than one minute to connect to network when AP is not broadcasting SSID and Windows XP's native configuration utility is used Note: Only drivers for Windows 2000/XP have been update with this package. You do not need to update the driver, if you use Widows 98 SE/NT 4.0. version of Configuration Utility (Windows 98 SE/NT 4.0) in this release is ver.2.4. <2.4.1.4/1QWC28WW> - (New) Added support for WPA - (New) Added support for CCX Note: Only drivers for Windows 2000/XP have been update with this package. You do not need to update the driver, if you use Widows 98 SE/NT 4.0. <2.4.1.6/1QWC51WW> - (Fix) Cannot connect to network if multiple SSIDs are defined in AP. Note: Only drivers for Windows 2000/XP have been update with this package. You do not need to update the driver, if you use Widows 98 SE/NT 4.0. <2.4.1.7/1QWC54WW> - (New) Added support for IBM 11a/b/g Wireless LAN Mini PCI Adapter - (New) Added support for ThinkPad R50, ThinkPad T41 <2.4.1.9/1QWC58WW> - (New) Added support for ThinkPad R50p, ThinkPad T41p - (Fix) Wireless LED turns On after resume when radio is turned Off prior to suspend. <2.4.1.10/1QWC60WW> - (New) Added support for ThinkPad X40 - (Fix) WPA-PSK hexadecimal input is case sensitive - (Fix) Connect to AP with driver installation default if the AP has no security set and allows connection with SSID "ANY" INSTALLATION INSTRUCTIONS ------------------------- NOTE: Both Wireless LAN Driver and WPA Support Program must be installed regardless of the usage of WPA features. NOTE: The following software must be updated when you install this package. - IBM Access Connections ver. 2.73 or later - Hotkey Features for Windows 98/Me/NT/2K/XP ver. 1.03.0371 or later NOTE: ThinkPad Software Installer provides install and uninstall wizards for the Wireless LAN Driver for the following operating systems: - Microsoft Windows 2000 - Microsoft Windows XP Device Driver Installation Instructions --------------------------------------- Windows 98 SE/2000/XP INF Installation 1. Double-click Dual-Band Wi-Fi Wireless Mini-PCI Adapter, 11a/b/g Wireless LAN Mini PCI Adapter or PCI Ethernet Controller if this is the first installation to the system, in Device Manager. 2. Click Update Driver in the Driver tab. 3. Click Next twice. 4. Specify the location of the driver. 5. Click Next twice and follow instructions on the screen. 6. Click Finish and Click Yes to restart the system when asked to. Windows NT 4.0 1. Start Windows NT 4.0. 2. Click "Start", click "Settings" and click "Control Panel". 3. Double-click "Network" icon. 4. If this is the first time to configure the Network, it will display "Network Configuration" dialog box, then proceed to the next step. If not, go to step 14. 5. Click "Yes" button. 6. Select "Wired to the network". 7. Click "Next>" button. 8. Click "Select from list..." button. 9. Click "Have Disk.." button. 10. Type the path to the directory that contains the OEMSETUP.inf file in Insert Disk dialog box. 11. Click "OK" button. 12. Select "Dual-Band Wi-Fi Wireless Mini-PCI Adapter" or "11a/b/g Wireless LAN Mini PCI Adapter". 13. Follow the instructions that follows and reboot the system. 14. Click "Adapters" tab. 15. Click "Add..." button. 16. Click "Have Disk..." button. 17. Type the path to the directory that contains the OEMSETUP.inf file in Insert Disk dialog box. 18. Click "OK" button. 19. Select "Dual-Band Wi-Fi Wireless Mini-PCI Adapter" or "11a/b/g Wireless LAN Mini PCI Adapter". 20. Click "OK" button. 21. Click "Close" button. 22. Follow the instructions displayed on the screen. 23. Click "Yes" when prompted to restart the computer. Configuration Utility Installation Instructions ----------------------------------------------- Windows 98 SE 1. Windows Management Instrumentation (WMI) is prerequisite. If your computer do not have WMI installed, go to Microsoft's web site and down load the latest WMI and install it first. 2. Run Setup.exe and follow the instructions. Windows NT 4.0 1. Run Setup.exe and follow the instructions. Windows 2000/XP These operating systems are not supported. Use IBM Access Connections to setup Wireless Networking configurations. Windows NT 4.0 Unattended Installation ------------------------------------- To install the IBM 11a/b/g Wireless LAN Mini PCI Adapter Driver without any interruption, please following these steps. This is for system administrators' use only. 1. Start Windows NT 4.0, logon with administrative privileges. 2. Copy the I386 Folder from the Windows NT 4.0 CD-ROM to the hard drive. 3. From Service Pack 6a CD run "sp6i386 /X" and extract the Service Pack 6a file to hard drive. Specify $OEM$ when prompted for target directory. 4. Create the following folder structure with the following files: | +---\I386 | +---\$OEM$ | | | +---\C | | | | | +---$$RENAME.TXT | | | | | +---\WINNT | | | | | +---\SYSTEM32 | | | | | +---\DRIVERS | | | +---\NET | | | | | +---\5211 | | | | | +---ANTPCIEX.EXE | | +---ANTPCISY.SYS | | +---AR5211N4.SYS | | +---OEMSETUP.INF | | | +---CMDLINES.TXT | +---UNATTENDED.TXT 5. Copy the ndis.sys file from your Sevice Pack 6a CD into the directory \I386\$OEM$\C\WINNT\SYSTEM32\DRIVERS\ 6. Modify the \I386\UNATTEND.TXT to look like this: [Unattended] OemPreinstall = yes NoWaitAfterTextMode = 1 NoWaitAfterGUIMode = 1 FileSystem = LeaveAlone ExtendOEMPartition = 0 ConfirmHardware = no NtUpgrade = no Win31Upgrade = no TargetPath = WINNT OverwriteOemFilesOnUpgrade = no OEMSkipEULA = yes [UserData] FullName = "Your User Name" OrgName = "Your Organization Name" ComputerName = COMPUTER_NAME ProductID = "Your Product ID" [GuiUnattended] TimeZone = "(GMT-08:00) Pacific Time (US & Canada); Tijuana" OemSkipWelcome = 1 OEMBlankAdminPassword = 1 [Display] ConfigureAtLogon = 0 BitsPerPel = 16 XResolution = 640 YResolution = 480 VRefresh = 70 AutoConfirm = 1 [Network] Attend = no InstallAdapters = AdaptersSection InstallProtocols = ProtocolsSection JoinWorkgroup = workgroup [AdaptersSection] ATH = ATHParameters, \$OEM$\net\5211 [ATHParameters] [ProtocolsSection] TC = TCParameters [TCParameters] DHCP = yes [ServicesSection] 7. Modify the \I386\$OEM$\CMDLINES.TXT to look like this: [Commands] ".\update\update.exe -u -z" 8. Modify the \I386\$OEM$\C\$$RENAME.TXT to look like this: [$WIN_NT$.~LS\$OEM$] ADSINT~1.BCP="adsinterests.bcp" APPSER~1.CLA="appserver.class" BENEFI~1.BCP="benefitplan.bcp" BENEFI~2.BCP="benefitqualifier.bcp" BENEFI~3.BCP="benefitstatus.bcp" BENEFI~4.BCP="benefittaxstatus.bcp" BOOKFL~1.ASP="bookflight.asp" CONTEX~1.CLA="context.class" DEPEND~1.BCP="dependent.bcp" DEPEND~2.BCP="dependenttype.bcp" DESTIN~1.BCP="destination.bcp" EBDSTA~1.BCP="ebdstatus.bcp" EMPLOY~1.BCP="employeebenefit.bcp" EMPLOY~2.BCP="employeebenefitdependent.bcp" EMPLOY~3.BCP="employeedependent.bcp" EMPLOY~4.BCP="employeequalifier.bcp" EMD2DC~1.BCP="employeestatus.bcp" EXAIRI~1.EXE="exairinstall.exe" EXAIRI~1.VBP="exairinstall.vbp" EXAIRI~1.VBW="exairinstall.vbw" FLIGHT~1.BCP="flightschedule.bcp" HALDLL~1.SOF="hal.dll.softex" HALMPS~1.SOF="halmps.dll.softex" IIBKUP~1.ASP="iibkupset.asp" IISSET~1.BAS="iissettings.bas" IMTXAS~1.CLA="imtxas.class" INTERE~1.BCP="interestcategories.bcp" INTERE~2.BCP="interests.bcp" MEMBER~1.BCP="membership.bcp" MEMBER~2.BCP="membershiptype.bcp" MEMBER~3.BCP="membersinterests.bcp" MTSEVE~1.DLL="mtsevents.dll" OBJECT~1.CLA="objectcontext.class" OUTPUT~1.CMD="outputexairbenefits.cmd" PHYSIC~1.BCP="physician.bcp" PLANFI~1.BCP="planfield.bcp" PLANST~1.BCP="planstatus.bcp" QUALIF~1.BCP="qualifier.bcp" QUALIF~2.BCP="qualifierclass.bcp" QUALIF~3.BCP="qualifierstatus.bcp" SECURI~1.CLA="securityproperty.class" TAKEAN~1.BCP="takeanumber.bcp" TAXSTA~1.BCP="taxstatus.bcp" TESTOR~1.EXE="testoraclexaconfig.exe" TRANSA~1.BCP="transactions.bcp" TRANSA~2.BCP="transactiontype.bcp" 9. Run WINNT /U:UNATTEND /X /F /B /S: WPA Support Program Installation Instructions --------------------------------------------- Windows 2000/XP 1. Run Setup.exe under WPA directory which is located under corresponding operating system's folder and follow the instructions. DETERMINING WHICH VERSION IS INSTALLED -------------------------------------- How to check Wireless LAN Driver version ---------------------------------------- To check the version of the Wireless LAN Driver that is installed on your system: Windows 2000/XP 1. Open Device Manager 2. Double click Dual-Band Wi-Fi Wireless Mini-PCI Adapter or 11a/b/g Wireless LAN Mini PCI Adapter to open Adapter Property window. 3. Click Driver tab. Windows 98 SE/NT 4.0 1. Double click wireless status icon in system tray and open Configuration Utility. 2. Click About tab. How to check Configuration Utility version ------------------------------------------ To check the version of the Configuration Utility that is installed on your system: Windows 98 SE/NT 4.0 1. Double click wireless status icon in system tray and open Configuration Utility. 2. Click About tab. How to check WPA Support Program version ---------------------------------------- To check the version of WPA support program that is installed to your system, follow the following instructions: Windows XP 1. Open Wireless Network Connection Properties for Dual-Band Wi-Fi Wireless Mini-PCI Adapter or 11a/b/g Wireless LAN Mini PCI Adapter. 2. Check the WPA Security Protocol(IEEE 802.1x). Windows 2000 1. Open Local Area Connection Properties for Dual-Band Wi-Fi Wireless Mini-PCI Adapter or 11a/b/g Wireless LAN mini PCI Adapter. 2. Check the WPA Security Protocol(IEEE 802.1x). Trademarks ---------- * IBM and ThinkPad are registered trademarks of IBM Corporation. * Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.