Drivers/Client tools for IBM High Rate Wireless LAN PC Card (P/N 09N9904 replacement 
for 09N9863) for Windows 95.

File Contents:
---------------
This self-extracting EXE file contains the client software, drivers, and firmware 
for the IBM High Rate Wireless LAN PC Card.

Installation Instructions:
---------------

1. Use Windows Explore to find the win95wl.exe file that was downloaded and double 
click on it.  A PKSFX Extraction window will appear.  Click on the "Extract" button.  
NOTE (If a window "Create C:\wlan directory?" appears, Click Yes).  C:\wlan is the 
default directory that the file will extract itself into.  If you chose to extract 
to another directory, use that directory in the following instructions instead 
of "C:\wlan".

NEW INSTALLATION OF CLIENT MANAGER INSTRUCTIONS:
a) Click "START" > "RUN".
b) Enter "C:\wlan\setup.exe"
c) Click "OK".
d) Follow the on-screen instructions.
e) At the end of the installation, you may be informed that you need to install
an updated COMCTL32.DLL. If so, you will be instructed to run W95WS2.EXE. This
is an older file name, the current file name is 50COMUPD.EXE
This file is not provided with this installation, but may be found on the
original installation CD in the Xtras directory or downloaded from Microsoft's
Web site at http://www.microsoft.com  Please see Microsoft Knowledgebase article
Q186176 for further information.


UPGRADE EXISTING CLIENT MANAGER INSTRUCTIONS:
a) Click "START" > "SETTINGS" > "CONTROL PANEL"
b) Double-click on "Add-Remove Programs"
c) Click on "IBM Client Manager"
d) Click on "Remove"
e) Perform the NEW INSTALLATION OF CLIENT MANAGER instructions above.


NEW INSTALLATION OF IBM WIRELESS LAN PC CARD AND DRIVERS:
NOTE: The Client Manager Software must be installed prior to the PC Card and 
driver installation.
a) Insert the IBM High Rate Wireless LAN PC Card into the laptop.  This should 
automatically start update Device Driver Wizard.  Click "Next", Please wait for 
the next window to appear. (If system is a Thinkpad 600, Select Have Diskette 
provided by card manufacture, Click OK. Disk Install window appears, enter 
C:\WLAN, then Click OK. Continue installation at step (d)
b) Select "Other Locations"
c) In Location Box, type "C:\wlan", Click 'OK, Click "Finish"
d) Insert Disk window appears. Click "OK"
e) Copying files window appears, Enter C:\WLAN, click "OK"
f) Set up file error window appears. Click "OK"
g) Set up file error window appears. Click "OK"
h) Insert Disk window appears. Click "OK"
i) Set up file error window appears. Click "OK"
j) Set up file error window appears. Click "OK"
k) Copying files window appears, Enter C:\windows, click "OK"
l) Copying files window appears, Enter C:\windows\system, click "OK"
m) Copying files window appears, Enter C:\windows, click "OK"
n) Version conflict window appears, Click Yes.
o) After Installation is complete, Click "Start", Click "Settings", Click 
"Control Panel".
p) In Control Panel, Double Click "Wireless Network" icon.


q) An "Add/Edit Configuration Profile" window will appear
1) Click on "Edit Profile" button.
2) Enter a network name in the "Basic" tab. (Please see your system 
administrator for a network name)
3) Click "OK", Click "OK"
r) Restart your computer.
s) After your computer restarts, complete network setup. ( See your system 
administrator for information)


TO UPGRADE THE DRIVERS FOR A CARD YOU HAVE ALREADY INSTALLED:
a) Click "START" > "SETTINGS" > "CONTROL PANEL"
b) Double-click on "System"
c) Click "Device Manager"
d) Double-click on "Network Adapters"
e) Double-click on "IBM High Rate Wireless LAN PC card"
f) Click on "Driver" tab.
g) Click the "Update Driver" button.
h) Click the "Next" button.
i) Click on "No, Select Driver from list" radio button.
j) Click the "Next" button.
k) Click the "Have Disk" button.
l) Enter "C:\wlan\win_95".
m) Click on "OK"
n) Follow the on-screen instructions.
o) Note: You may see an error message, " The Client Manager is not installed" 
I the client manager is already installed, you may ignore this message by 
clicking "OK".
p) When "IBM High Rate Wireless LAN PC Card Properties" window re-appears, 
driver is installed.


TO UPGRADE YOUR FIRMWARE:
a) Click "START" > "RUN"
b) Enter "C:\wlan\wsu10616.exe"
c) Click "OK"
d) Follow the on-screen instructions.

If you have any further questions, you can download complete documentation 
at http://www.pc.ibm.com/support.